Platte/Sullivan, MN

comments (0)

Outing Information

Date
Start/End Time
6:11pm to 7:30pm
Best Fishing Time
-
Rating
Good
Classification
Public
Water Temp
68.0°F
Water Clarity
Stained - 1' to 3' visibility
Water Level
Normal
User
Dave Maas
Loading map...

Fish Caught

Northern Pike

Caught Avg Size Pattern Optional Fields
1 2 lbs Bluegill (Custom) Evergreen Jackhammer Time Caught: 06:11 PM
1 1 lbs Hot Snakes Z-Man Goat Toadz
2 1½ lbs

Largemouth Bass

Caught Avg Size Pattern Optional Fields
3 1 lbs Chart/White/Org Big Blade Chatterbait Time Caught: 06:28 PM
2 2 lbs Black/Blue VMC Utility Jig 1/2oz
4 1 lbs Black/Blue VMC Utility Jig 1/2oz
9 1.22 lbs

Dink Pike

Caught Avg Size Pattern Optional Fields
1 1 lbs Black/Blue VMC Utility Jig 1/2oz
1 1 lbs
Total: 12 fish Top Patterns: VMC Utility Jig 1/2oz (7) Big Blade Chatterbait (3) Z-Man Goat Toadz (1)

Weather

SkiesMorningAfternoonEvening
Sunny X X X
Mostly Sunny X
Mostly Cloudy X
Precipitation
None X X X
Wind
Light - 5 to 10 knots X X X
Medium - 10 to 15 knots X X
Air Temp High/Low
79.8°F / 60.6°F
Wind Direction
SE
Weather Front
-
Barometer
30.04in
Moon Phase
61% Full (Waxing gibbous)

Other Patterns Tried

No other pattern information for this outing.

Hatches

No hatch information for this outing.

Insect Seining

No seining information for this outing.

Fishing Partners

Trophy (01)

Waypoints

No waypoints were saved with this outing.

Tides

No tide information was saved with this outing.

Notes

PM 9 Bass 3 Pike (9.28lbs)(I slept way in today, resulting in a late start. I got a pike off the dock. I started at the GOMH and got 3 bass there in the SE corner of the tube. I then ran to the Intersection. I got a bass off the NE Reed Point on the Big Blade Chatter. I anchored and caught several more bass on a jig along the reed line on the backstop side where the wind was blowing in. I then went and tried to work the Cafeteria side, but the wind and trolling motor made my boat control trash. I got one bass and one dink pike. When I got back in, I took a wire brush to the trolling motor leads and the battery terminals, hopefully it helps.)